Termination Kit: 4 x 4mm gold-plated screw-fit speaker connectors Gold-plated 4mm screw-fit loudspeaker connectors – pack of 4 with 2 black and 2 red caps. Available in Z-plug (while stocks last) or new and improved 4mm ‘banana’ versions. Screw-fit 4mm connector fitting instructions: 1. Remove approx 120mm of outer jacket from the cable to expose the conductors. 2. Fit Chord Company trousers as required, ensuring the arrow is pointing in the correct direction. 3. Strip approx 8mm from the conductor ends so bare wire is exposed. 3. Undo the grubscrew and push the bare cable end into the recess at the rear of the connector. Tighten grubscrew on to the bare conductor until cable is securely held in place. 4. Fit colour-coded caps to provide easy identification of positive and negative cables.